Thanks to a suggestion I became aware of how important it may be the concept of reflected light and incident light the measurements (light of course) in photography. Not what should be the confusion on this subject but I think certainly there is a widespread doubt on these two types of measurement. The difference between these two concepts is quite clear and the names of them give us light (pun intended) to understand.
When making a measurement of light with a handheld meter
have two options 1) Use the light metering incident.
2) Use the measuring the reflected light.
What is the difference between these two measurements ...? The difference is simple ...
have two options 1) Use the light metering incident.
2) Use the measuring the reflected light.
What is the difference between these two measurements ...? The difference is simple ...
By measuring the incident light what we are measuring with our hand held meter is the light that strikes directly on the surface we want to photograph. To realizae this measurement, the hand-held light meter should be located on the surface to photograph and he shall tell us exactly how much light is coming to that area so we can adjust the settings of your camera and get a shot well exposed. This type of measurement is only possible with hand-held photometers and the cameras, despite having built-in light meters can not do it.
photometers in hand, for the measurement of incident light the light diffusing shell (the "ball" a pretty white with all photometers) should be on the sensitive cell. Now, with the measurement of reflected light what we are measuring with our hand held meter is only the light that reflects want to photograph the surface. This type of measurement is less accurate than the incident and the use must be careful because we do not necessarily accurately measuring the surface of interest. The current cameras use this type of measurement and a photometer containing works by collecting the light (reflected by the objects ...) through the lenses.
photometers in hand, for measuring the reflected light diffusing shell light should be on the sensitive cell.
When we use one or the other?
When we hand photometer will have to use the measurement of reflected light as it is not possible with a camera (aun. ..) an incident light metering (Canon notes, I'm sure that can not be complicated add an incident light meter in your professional camera bodies but can not afford ....).
Now, if we do have a handheld exposure meter (which I recommend, much) in the vast majority of cases use the incident light metering. Use this type measurement since in most cases, at least in the type of photography I do, we will be able to approach the object to be photographed for in situ measurement . If you are working on a study manual flashes of study, provided we can get closer to the / the model to measure "in that part of the body that we want to be well exposed.
Now what happens if we measure the light from an object that is not within our reach? (Eg a mountain) Then we have two choices: We can put our hiking boots, climbing the mountain, a measurement of the incident light at the point of the mountain that we want it well exposed, get the result, down the mountain, put the parameters in the camera and shoot or, better yet, we can stay where we are and use measurement of the reflected light of our handheld exposure meter. So we will measure the light reflected from the mountain. We so much like what our camera when we press the shutter button slightly.
So, to summarize. We use our handheld meter to measure primarily the light incident when we approach the subject you want to use the photograph and measuring the reflected light when we can not approach the subject you want to photograph.
Now, if we do have a handheld exposure meter (which I recommend, much) in the vast majority of cases use the incident light metering. Use this type measurement since in most cases, at least in the type of photography I do, we will be able to approach the object to be photographed for in situ measurement . If you are working on a study manual flashes of study, provided we can get closer to the / the model to measure "in that part of the body that we want to be well exposed.
Now what happens if we measure the light from an object that is not within our reach? (Eg a mountain) Then we have two choices: We can put our hiking boots, climbing the mountain, a measurement of the incident light at the point of the mountain that we want it well exposed, get the result, down the mountain, put the parameters in the camera and shoot or, better yet, we can stay where we are and use measurement of the reflected light of our handheld exposure meter. So we will measure the light reflected from the mountain. We so much like what our camera when we press the shutter button slightly.
So, to summarize. We use our handheld meter to measure primarily the light incident when we approach the subject you want to use the photograph and measuring the reflected light when we can not approach the subject you want to photograph.
Using the measurement of incident light in photography and without manual flashes with
Al without shooting outdoor manual flashes usually be able to take licenses on the use of hand held photometers not we can take in the photography studio where we need to be more careful about our measurements.
In the next image, for example, we see that if we measure in any of the three points marked with a red asterisk using the handheld photometer oriented all cases the same way towards the camera and taking care not to cast a shadow on the meter with our body, the measurement result would be the same. It is a bright light situation where no shadow can vary our reading. The intensity of the sun on the three points scored is the same. Moreover, if we were near the scene to be shot and we were enlightened by the same light (the sun without any shade) could make a measurement of incident type from which estuviémos without approaching the beach, the dog or the sea we know that light at the four points (including one in which we have the camera) is the same. This
same situation will not happen if we have a scene like that presented to the left where we have shadows or to work with manual flashes (see case below). In this scene, our manual meter reading will give us an incident light differently depending on what part of the scene we place. If we want to photograph the model, a reading that we could get would be F7.1 and 1 / 250 while if we want to photograph the scene that is furthest from the model, being in shadow, we would like f4 reading 1 / 250. Perhaps it is good time to remember that the distance to the subject does not change the meter reading that hand. By this I that if we get a reading of F7.1 and 1 / 250 in the model, no matter the distance you do the picture. The measure we introduce in our cameras will always be the same even make the picture with two different focal (17 mm and 100 mm) or we simply turn away or get closer to the scene.
same situation will not happen if we have a scene like that presented to the left where we have shadows or to work with manual flashes (see case below). In this scene, our manual meter reading will give us an incident light differently depending on what part of the scene we place. If we want to photograph the model, a reading that we could get would be F7.1 and 1 / 250 while if we want to photograph the scene that is furthest from the model, being in shadow, we would like f4 reading 1 / 250. Perhaps it is good time to remember that the distance to the subject does not change the meter reading that hand. By this I that if we get a reading of F7.1 and 1 / 250 in the model, no matter the distance you do the picture. The measure we introduce in our cameras will always be the same even make the picture with two different focal (17 mm and 100 mm) or we simply turn away or get closer to the scene.
Now, what will happen if we work with manual flashes ...? is here takes on great importance the use of handheld exposure meter. I should also mention that so far, with the photos above, we had been doing the measurements with handheld light meter in the "ambient light measurement (usually an icon with the picture of the sun ...). Now we have to change as a "flash light metering."
So we have taken the first step to leave our hand photometer mode flash metering. This MEANS, as stated in the previous article, which generally leave the parameters of the meter at 1 / 125 ISO 100 and wait for the flash output to the meter manual labor of a value f us to put our camera correct exposure. In the example photo, the measurement was made for the nose (the meter is placed over the nose of the model being careful not to cast a shadow on the dome diffuser) which was "properly" exposed. In the case of this picture we have a single source of light coming from the left and that casts a shadow on the face of the model. If we made the measurement (incident) on the cheek is dark here appeared well exposed looking at that makes the nose of the model would surely be burned. In this example we are dealing with a very small light source so be careful with the measurements we do and choose rather than part of the face we want to be well exposed. In another article I will try to give specific examples of case studies of measurements, while I hope that the concept of measuring light incident / reflected and their differences there is a little clear.
0 comments:
Post a Comment