Thursday, November 26, 2009

Penalties For Using Fake Coupons Canada

Gexto: python xlib

NÄ­men hao!

To conduct described in post above, I thought of using the implementation of Xlib in Python, called python-xlib . Although there is continued development, I think I will for what I do. The fact that it is written entirely in Python is an advantage to me to snoop your code;) In addition, it also covers several extensions. In particular, interests me is XTEST, which has some mechanisms to handle the input.

Let's do some tests. To follow, you must have installed the package python-xlib. This depends on your distribution. For example, to Debian (and derivatives like Ubuntu ), the package is in the official repositories, so a simple
 # apt-get install python-xlib 
solves it.
Let's start easy, let's try to move the mouse ... without touching: D. Python open a console (I like ipython ), or write to a file and run it as you like. First I put the code, then we are doing.

 Xlib.display import from 
Display
d = Display ()
d.screen r = (). Root
for i in range (200):
r.warp_pointer (i, i)
d.sync ()

Simple, right? Desgranemoslo. First, regardless of class Display . Xlib is a display for a workstation, ie a monitor, keyboard and mouse (this is very simplistic, because there may be many different combinations, for example, two or more monitors, or a tablet, etc.). . We note that X is a server, and we act as clients. When creating a display , really we do is connect to the server.

From this server, get the screen, a complex subject that interests us prince Window root, root . In this window you can say you move the mouse, warp_pointer () . Until we sync () in Display , no actions are sent to the server, and therefore it is as if we did not do anything. To enhance the effect, rather than move to a point, what we do is move around a line. For that is the loop.

If you run, you should see that the mouse is moved to the upper left corner (the point (0.0) of the root window), and travels 200 pixels in x and y axis, in steps of 1 pixel . Click

is a bit more complex. To this end, need the XTEST extension. We will use a feature called fake_input () , which simulates a keystroke, both mouse and the keyboard. Consider the code to press the right mouse button:

 Xlib.ext import from XTest 

from Xlib import X
xtest.fake_input (d, X. ButtonPress, 3)
xtest.fake_input (d, X. ButtonRelease, 3)
d.sync ()

import the relevant modules: XTest and X (for events that will generate). As you can see, it uses the same display, 'd', we had created earlier (the same connection). Indicate which event you want to send to the server, in this case first a ButtonPress and then a ButtonRelease , and data related to the event, here is the number of button we press. When you back a sync () , it sends all the X server, and depending on where the mouse pointer, you should see a contextual menu, or something: D

Do you want to test the keyboard? Well, I think that will be another post, because it is a bit messy: P.

Zaijian!

Wednesday, November 25, 2009

Recomended Currency To Invest In

About Gexto (library) project

Hello!

You see, lately I am more encouraged to proceed with the project, if only to think (because the development phase still is not officially open). This post is about the library as we mentioned in the previous.

I noticed that both the editor and the compiler are just accessories. The only thing necessary is the library. I mean, the ultimate goal will be a script , the compiler generated from a project created with the editor. Well, that script can be written by hand (obviously do not want that to be always true, but to test the library is valid). So the part that will begin this: Gexto.

As I have thought, one of the main functions will be to emulate human behavior, that is, generating keyboard events and mouse. Currently, most systems that will run this application has only one device of each type (if this changes, we'll see: D). Thus, intuitively, we have two objects, one for the keyboard and one for the mouse (two separate singleton ;)). These objects have an interface to programmatically control devices . For example, for the mouse, you should be able to move, press the right button, release (with support for all possible buttons, of course: D), get your position, etc. And for the keyboard idem.

I would outline the interfaces here. Let's see. The mouse:
 class Mouse: 
def getPosition (self): pass


def moveTo (self, x, y, abs = True): pass


pressButton def (self, button): pass


releaseButton def (self, button): pass


The arguments x and y are integers indicating the position and abs specifies if the motion is absolute (from position 0.0 root window ), or on the current mouse position. Button is an integer that indicates the number of button press. You can add some methods to simplify some common tasks, for example, a leftclick (), or Dragt (). The keyboard could be something like: class
 Keyboard: 
pressKey def (self, key): pass


releaseKey def (self, key): pass

Again, also add some methods for common tasks. In this case, very often want to introduce many characters in a row, instead of going one by one. To do this, something like generateKeyEvents ( seq) would be useful, where seq is a string.

Well, I think for today, I have enough: D. Until the next post!

Tuesday, November 24, 2009

Pityriasis Rosea With Swollen Glands



Hello again.

Following the approach of the previous post, Gexto not going to be a single tool but a set of them. At first glance, I see at least three completely distinct entities.

  1. The sequence editor. With actually created screencasts , specifying the sequence of actions, settings, project management, etc.
  2. Library. Be a module that encompasses everything needed to launch the scripts that run the actions.
  3. Compiler, something easy to take as input a file Gexto draft and produce a self Python script (which means that it depends on the editor), to run anywhere.
Names? Good question. I've never been too good in this area:) But hey, someone must have: the library will be "Gexto" (a wave of imagination), the compiler might be "Gexto (uff, maybe this change), and the editor is going to stay with "Gexto." Well, divide and conquer ... to see if it's true;)

Monday, November 23, 2009

Best Myoplex Protein Bars Sale In Mumbai

Parties Moving on Project accepted

Hello!

I think it's time to go impezando with the project. And what better place to start is to tell what all this;)

I have often found it necessary to explain step by step how to do a certain task in GNU / Linux. And on those occasions, I thought: "If I had a video to show it would be great." Other times, the problem has been different: add a new feature to the GUI of an application, or a new plugin to certain websites, and having to perform the same steps over and over again to prove it. Exasperating.

For these occasions (and others), we can use software to help us. Both to create a video quickly to automate testing of a graphical interface. Although it seems that it has nothing to do, but they certainly share a lot of scope of the problem. If we we search for tools for this, we find some. Most proprietary, some free others. But almost all suffer from something. For example, I found Xnee . It promises a lot, but is based on an extension of X (RECORD) several months ago that does not work (so I could not test it). It solves one problem (the automation), but not all.

Another library that is used for the same is LDTP . It is dedicated to test automation for graphical interfaces. Promises much, but uses the Accessibility libraries for introspection of widgets. Not that I have nothing against them, but they are quite intrusive, and sometimes I've encountered problems (especially with the combination python (GIL) + Gtk (not thread-safe) + LDTP).

On the other hand, there are herraminetas to record the screencast (as recordmydesktop , istambul , etc.). They specialize in other work (the recording), but do not give the possibility to add "visual objects" to the video (as text boxes, zoom, envelopes, etc.)..

would have to combine several of these tools, creating some ad-hoc scripts to our task. While it could do (I found myself in the need to do some time, which in fact was the key to starting this project) is not comfortable.

is why what comes out the project Gexto . Intended as a complete software that allows to perform the following tasks in a visual and simple test
  • Automating graphical user interface (GUI). Burn video
  • the result of automation.
  • Add visual elements to emphasize certain objects or areas, such as text boxes, shading, zoom, control issues, etc..
  • Power
  • individually edit each group of shares, browse through the flow of events, etc. Generate scripts
  • autonomous to launch without needing the complete tool or know how it works.
  • audio support, whether direct or off-line.
And many more things that I do not know right now, but I happen: P Of course, I do not intend to reinvent the wheel. If I see or recordmydesktop LDTP serve me, I will use them as major projects are very valid. The aim is rather to unite all efforts (whenever possible).

The tools I use are very different, it is very broad set of problems to solve. But I have one thing clear: be using Python, which has a large amount very useful module, though not ruled out parts in other languages \u200b\u200b(with their associated binddings ).

the moment, little more. Since I randomly think about design ideas and problems they present. So I'll write about it.

Hello everyone!

Friday, November 20, 2009

Lauren London Hair Weaves



Good news!

I have been accepted into the III Free Software Contest! That means that I can start thinking about how to do this;) So get to work.

Greetings.