a kid, when I made for school work (when done by hand is no computers .... eh ...) always began with the dictionary definition of the Royal Academy English Language of the item were to try. With this theme I take up this habit photometry.
( De photometer).
1. f. Part of optics which deals with laws relating to light intensity and methods to measure it.
Okay, all very nice, but this is how you eat ...?
One of the reasons why I write this is that quite often visit the website of strobist and always surprised me that despite promoting working with small flashes (not study ...) in manual mode, never seem to mention whether or not to use handheld photometers. Seem, in most cases, based on the histogram of the camera more than in these devices for me, are true miracles from heaven.
One of the reasons why I write this is that quite often visit the website of strobist and always surprised me that despite promoting working with small flashes (not study ...) in manual mode, never seem to mention whether or not to use handheld photometers. Seem, in most cases, based on the histogram of the camera more than in these devices for me, are true miracles from heaven.
Al grain. What is a photometer and serving?
A photometer is an instrument today are the vast majority of integrated cameras for practical reasons (to put it) also can be purchased separately from the camera (handheld photometers) . Roughly a handheld meter allows measure light in a scene separately from the camera so that, once we move data handheld meter indication to the camera, we get a picture well exposed.
The three parameters involved in the exhibition of photography and always we must bear in mind are:
- The opening of the diaphragm
- shutter speed;
- Sensitivity (ISO)
I will not explain each of the parameters for what I inferred that they know these concepts and what it means to modify each of them to achieve an effect or another in the footage without flash. Just see what effect primarily involves editing in footage with manual flash.
La / s question / s the million: How do you use? When does it I can use? How do I transfer the data that my camera gives me ...?, etc.
Personally I use the meter in photography studio flashes that work with study manuals. The trial and error, despite delivering results today with digital photography, takes time and is not as accurate. In addition, the meter allows us to work with more than one light source and light enough to achieve accurate measurements.
Now a little theory before entering practice with handheld light meter
Perhaps one of the most important thing to understand is that the flashes are controlled manual always with the aperture of our goals. This opening will be responsible for a scene is underexposed, overexposed or correct light " (please note that a scene under / overexposed not necessarily mean it is wrong).
If we overexpose a scene by using our manual flash, so we have to do is let during the brief moment that the flash lasts our diaphragm is more open (let in more light). If on the contrary, what we do is to underexpose a scene by using our manual flash, so we have to do is leave during the brief moment that the flash lasts, our diaphragm is more closed (let in less light).
A low power flash required to work with large aperture opening (f2.8 for example) while a powerful flash that allows us to work with small aperture openings (eg f22).
The shutter speed only affect how much light outside the manual flash (ambient light for example) we can get from the scene. The shutter speed does not affect the exposure of the scene becomes illuminated by the flash but it does affect the environment. To illustrate this I have attached some photos that will help us understand this better. This group of photographs were taken with a Canon 430 EX flash in manual mode to a power of 1 / 32 and an EOS 400d manual also can modify the necessary parameters. In the six pictures used the same flash power and opening the same aperture (f 3.5) but between them increased by making light path changing the shutter speed.
In this first scene ( f3.5 1 / 125) can only see the lit by the flash (the lattice door, the balustrade of the terrace)
A photometer is an instrument today are the vast majority of integrated cameras for practical reasons (to put it) also can be purchased separately from the camera (handheld photometers) . Roughly a handheld meter allows measure light in a scene separately from the camera so that, once we move data handheld meter indication to the camera, we get a picture well exposed.
The three parameters involved in the exhibition of photography and always we must bear in mind are:
- The opening of the diaphragm
- shutter speed;
- Sensitivity (ISO)
I will not explain each of the parameters for what I inferred that they know these concepts and what it means to modify each of them to achieve an effect or another in the footage without flash. Just see what effect primarily involves editing in footage with manual flash.
La / s question / s the million: How do you use? When does it I can use? How do I transfer the data that my camera gives me ...?, etc.
Personally I use the meter in photography studio flashes that work with study manuals. The trial and error, despite delivering results today with digital photography, takes time and is not as accurate. In addition, the meter allows us to work with more than one light source and light enough to achieve accurate measurements.
Now a little theory before entering practice with handheld light meter
Perhaps one of the most important thing to understand is that the flashes are controlled manual always with the aperture of our goals. This opening will be responsible for a scene is underexposed, overexposed or correct light " (please note that a scene under / overexposed not necessarily mean it is wrong).
If we overexpose a scene by using our manual flash, so we have to do is let during the brief moment that the flash lasts our diaphragm is more open (let in more light). If on the contrary, what we do is to underexpose a scene by using our manual flash, so we have to do is leave during the brief moment that the flash lasts, our diaphragm is more closed (let in less light).
A low power flash required to work with large aperture opening (f2.8 for example) while a powerful flash that allows us to work with small aperture openings (eg f22).
The shutter speed only affect how much light outside the manual flash (ambient light for example) we can get from the scene. The shutter speed does not affect the exposure of the scene becomes illuminated by the flash but it does affect the environment. To illustrate this I have attached some photos that will help us understand this better. This group of photographs were taken with a Canon 430 EX flash in manual mode to a power of 1 / 32 and an EOS 400d manual also can modify the necessary parameters. In the six pictures used the same flash power and opening the same aperture (f 3.5) but between them increased by making light path changing the shutter speed.
In this first scene ( f3.5 1 / 125) can only see the lit by the flash (the lattice door, the balustrade of the terrace)
In this second stage ( f3.5 1 / 60) to have missed a step more light, we can see a small part of the horizon on the left side of the scene (note that the flash is illuminated by the exposed alike)
In this third stage ( f3.5 1 / 30) the horizon is much more clarity these two steps of light have allowed the ambient light "strain" on the scene (note that the flash is illuminated by the exposed alike)
In this fourth stage ( f3.5 1 / 15) the four steps of light controlled by the shutter speed and can see a much clearer horizon (note that the illuminated As the flash is still exposed)
In the fifth scene ( f3.5 1 / 8) the horizon appears ever more exposed (note that the flash is illuminated by the exposed the same)
and in this last scene ( f3.5 1 / 4) time iris aperture results well above the horizon while the illuminated by the flash still the same exposure.
now to use the meter ...
Most photometers operate similarly. We suggest three main data already described.
- The opening of the diaphragm
- shutter speed;
- Sensitivity (ISO)
In this picture you can see as represented by a common meter, the Sekonic L308-S
Most photometers operate similarly. We suggest three main data already described.
- The opening of the diaphragm
- shutter speed;
- Sensitivity (ISO)
In this picture you can see as represented by a common meter, the Sekonic L308-S
Most photometers also allow us to measure manual flashes lights that we use. In the case of this specific model of handheld exposure meter, the way we want to use is the one with the flash symbol. When selecting this mode, the meter runs forward to the flash output to be measured and once fired, the meter displays the data you interest to set the parameters of our camera. All this seems a bit cumbersome but we'll see now and in the studio control parameters measured when the lights are fairly straightforward.
As mentioned, it is necessary to study our cameras shoot in manual mode in this way to have total control over the parameters of the shot. Personally I always put the camera speed to 1 / 125 and ISO to 100 (working with Canon). So, if you already know this, all you need to know is what value to f. This is where we start to use our hand photometer
The manual flash metering is done with the meter on the surface we want to photograph. In the meter repeat the two parameters that we have in our chamber, ie, put the speed at 1 / 125 and ISO 100. Once these data are already on the meter, all you need is the flash and wait for the photometer us the value f (the only data we needed in the camera.) The aperture value or f-number will be that we introduce into the camera for correct exposure. If we take the camera using the same values \u200b\u200bas you have indicated the meter (eg 1 / 125 f5.6, ISO 100) is part of the scene on which we measure will be properly exposed.
As mentioned, it is necessary to study our cameras shoot in manual mode in this way to have total control over the parameters of the shot. Personally I always put the camera speed to 1 / 125 and ISO to 100 (working with Canon). So, if you already know this, all you need to know is what value to f. This is where we start to use our hand photometer
The manual flash metering is done with the meter on the surface we want to photograph. In the meter repeat the two parameters that we have in our chamber, ie, put the speed at 1 / 125 and ISO 100. Once these data are already on the meter, all you need is the flash and wait for the photometer us the value f (the only data we needed in the camera.) The aperture value or f-number will be that we introduce into the camera for correct exposure. If we take the camera using the same values \u200b\u200bas you have indicated the meter (eg 1 / 125 f5.6, ISO 100) is part of the scene on which we measure will be properly exposed.
0 comments:
Post a Comment